Restore NTLDR

Fixes for NTLDR Errors :

1. Restart the PC. The NTLDR error could be a fluke.
2. Check your floppy and optical (CD/DVD) drives for media. Often times, the "NTLDR is Missing" error will appear if your PC is trying to boot to a non-bootable floppy disk or CD/DVD.
3. Note: If you find that this is the cause of your problem and it's happening a lot, you might want to consider changing the boot order in BIOS so the hard drive is listed first.
4. Check the hard drive and other drive settings in BIOS and ensure they are correct. The BIOS configuration tells the computer how to use a drive so incorrect settings can cause problems, including NTLDR errors. There is usually an Auto setting for hard drive and optical drive configurations in BIOS which is usually a safe bet if you're not sure what to do.
5. Restore the NTLDR and ntdetect.com files from the Windows XP CD. Enter Windows XP Recovery Console copy d:\i386\ntldr c:\
   copy d:\i386\ntdetect.com c:\
6. Repair or replace the boot.ini file. Enter Windows XP Recovery Console bootcfg /rebuild Type Y in response to this question and press Enter. Type Windows XP Type /Fastdetect This will prevent the NTLDR error if the cause of the problem is a boot.ini file that is not configured properly for your Windows XP installation.
7. Write a new partition boot sector to the Windows XP system partition. Enter Windows XP Recovery Console fixboot
8. Repair the Windows XP master boot record. Enter Windows XP Recovery Console fixmbr
9. Open your computer's case and ensure that the cable that connects the hard drive to the motherboard is firmly in place. If this does not resolve the issue, try replacing the cable. NTLDR error messages could be caused by loose or malfunctioning IDE cables.
10. Perform a repair installation of Windows XP. This type of installation should replace any missing or corrupt files. Continue troubleshooting if this does not resolve the issue.
11. Perform a clean installation of Windows XP. This type of installation will completely remove Windows XP from your PC and install it again from scratch. While this will almost certainly resolve any NTLDR errors, it is a time consuming process due to the fact that all of your data must be backed up and then later restored.If you can't gain access to your files to back them up, understand that you will lose them all if you continue with a clean installation of Windows XP.
    Finally, if all else has failed, including the clean installation from the last step, you're most likely facing a hardware issue with your hard drive. Replace the hard drive and then
12. perform a new installation of Windows XP.

http://pcsupport.about.com/od/findbyerrormessage/a/ntldrmissingxp.htm

moshicko
elimeleh